Bosch Junkers 1119, Руководство пользователя

Страница: 7 / 44

7
Using the Remote Control
6 720 607 740
B The required temperature will flash
on the remote control display.
B The flashing will stop when the
required temperature is reached
(tolerance ± 3 °C).
Fig. 8 Temperature adjustment
4.5 "Program" Button on the
Remote Control
Memorizing the water
temperature with the remote
control "Program" button
B
Press the buttons or on
the remote control (Fig. 9, pos. 2),
until the required temperature (in
degrees centigrade) appears on the
remote control display (Fig. 9, pos.
1).
B
You will now be able to memorize
this temperature by keeping the
"Program" button on the remote
control (Fig. 9, pos. 3) pressed for 3
seconds.
Fig. 9 Memorising water
temperature
B
Only one temperature can be
memorized using the "Program"
button on the remote control.
B
At this point the remote control will
display the memorized temperature .
When the hot water tap is turned on,
the boiler will supply hot water for
washing at the temperature
memorized on the remote control.
6720607740-0511(telecomando)_all.fm Page 7 Friday, November 25, 2005 5:44 PM