Bosch I 8 OptiMUM Series, Инструкция по применению

Страница: 21 / 140

Basic settings en
21
Using instantaneous switching
1.
Set the rotary switch to
1
or
1
and hold.
→
Fig.
19
a
The ingredients are processed at
maximum speed.
2.
Release the rotary switch.
→ Fig. 20
a
The rotary switch springs to ⁠.
a
Processing stops.
Tip
Instantaneous switching is especially
suitable when using the following
accessories:
¡
Glass blender attachment
¡
Multi-chopper set
¡
Multi-blender attachment
7.12 Drive cover
Remove the protective cover to use
accessories on drive 2 or 3.
Removing drive cover
▶
Lift the protective cover of drive 2
or 3 by the side lug lift and re-
move.
→
Fig.
21
Fitting drive cover
▶
Position the protective cover of
drive 2 or 3 and press down firmly.
→
Fig.
22
8 Basic settings
You can configure the basic settings
for your appliance to meet your
needs.
8.1 Overview of basic set-
tings
You can find an overview of the basic
settings here.
Setting Description
LANGUAGE Select the dis-
play language.
TONE Switch signal
tones off or ad-
just the volume.
BRIGHTNESS Set the display
brightness.
UNITS
1
Set the display
units for the
scales.
1 Depending on the appliance spe-
cifications
8.2 Changing basic settings
Requirement:
The mains plug is in-
serted.
1.
If the display is switched off, press
any button.
2.
Press and hold and simultan-
eously.
a
The display shows the configura-
tion menu.
3.
Use to select the required set-
ting.
4.
Use or to change the selec-
ted setting.
a
The display shows "SAVING:
O & +".
5.
To save the changed setting, press
and hold and simultaneously.
a
The display shows "SETUP"
"SAVED".
6.
To change and save other set-
tings, repeat steps 3-5.
1
Depending on the appliance specifications