en
Cookware check
24
--------
To access the basic settings:
The hob must be off.
1.
Switch on the hob.
2.
Within ten seconds, touch and hold the
D
symbol
for approximately four seconds.
The first four displays provide product information.
Touch the
@
or
A
symbol to view the individual
displays.
3.
Touching the
D
symbol again takes you to the
basic settings.
™
and
‚
flash alternately on the displays and
‹
appears as a presetting.
4.
Touch the
D
symbol repeatedly until the required
function is displayed.
5.
Then use the
@
and
A
symbols to select the
required setting.
6.
Touch the
D
symbol for at least four seconds.
The settings have been saved.
Leaving the basic settings
Turn off the hob with the main switch.
t
Cookware check
Cookware check
This function can be used to check the speed and
quality of the cooking process depending on the
cookware.
The result is a reference value and depends on the
properties of the cookware and the hotplate being used.
1.
Place a cold saucepan containing approx. 200 ml of
water in the centre of the hotplate the diameter of
which matches the base of the pan most closely.
2.
Go to the basic settings and select the
™‚
ƒ
setting.
3.
Touch the
@
or
A
symbol.
A
will flash on the hotplate
display.
The function has now been enabled.
After 20 seconds, the quality and speed of the cooking
process will appear in the hotplate display.
Check the result using the following table:
To activate the function again, select the
@
or
A
symbol.
Notes
■
If the diameter of the hotplate used is much smaller
than the diameter of the cookware, only the middle
of the cookware can be expected to heat up. This
may result in the cooking results not being as good
as expected or being less than satisfactory.
■
You can find information on this function in the
section on
~
"Basic settings"
.
■
You can find information on the type, size and
positioning of the cookware in the section on
~
"Induction cooking"
.
™‹
Restore to standard settings
‹
Individual settings.*
‚
Restore factory settings.
*Factory
setting
Product information
Display screen
After-sales service index (ASSI)
‹‚
Production number
”š
Production number 1
Š†
.
Production number 2
‹
.
†
Result
‹
The cookware is not suitable for the hotplate and will therefore
not heat up.*
‚
The cookware is taking longer to heat up than expected and the
cooking process is not going as well as it should.*
ƒ
The cookware is heating up correctly and the cooking process
is going well.
* If there is a smaller hotplate available, test the cookware again on the
smaller hotplate.