51
Maintenance
Replacing an Oven Light
9
CAUTION
WHEN REPLACING AN OVEN LIGHT:
▯
Make sure the appliance and lights are cool and
power to the appliance has been turned off
before replacing the light bulb(s). Failure to do so
could result in electrical shock or burns.
▯
The lenses must be in place when using the
appliance.
▯
The lenses serve to protect the light bulb from
breaking.
▯
The lenses are made of glass. Handle carefully to
avoid breaking. Broken glass could cause an
injury.
▯
Light socket is live when door is open.
Bulb Specifications:
To Change the Bulb:
Porcelain Surfaces
Immediately wipe up acid spills
like fruit juice, milk and tomatoes
with a dry cloth. Do not use a
moistened sponge/cloth on hot
porcelain. When cool, clean with
hot soapy water or apply Bon-
Ami® or Soft Scrub® to a damp
sponge. Rinse and dry. For stub-
born stains, use soap-filled pads.
It is normal for porcelain to show
fine lines with age due to expo-
sure to heat and food soil.
Stainless Steel Sur-
faces
Never allow food stains or salt to
remain on stainless steel for any
length of time. Always wipe or
rub in the direction of the grain.
Clean with a soapy sponge, then
rinse and dry, or wipe with
Fantastik® or Formula 409®
sprayed on a paper towel. Pro-
tect and polish with Stainless
Steel Magic® and a soft cloth.
Remove water spots with a cloth
dampened with white vinegar.
Use Bar Keeper´s Friend® to
remove heat discoloration. Chlo-
rine or chlorine compounds in
some cleansers are corrosive to
stainless steel. Check ingredients
on label.
Plastic & Controls
When cool, clean with soapy
water, rinse and dry.
Probe
Wipe with soapy water. Do not
submerge. Do not wash in the
dishwasher.
Printed Areas
(Words & Numbers)
Do not use abrasive cleaners or
petroleum based solvents.
Part
Recommendations
Bulb Description
Bulb Image
40 watt, appliance
bulb, standard Edison
base.
▯
Turn off the power to
the oven at the main
power supply (fuse or
breaker box).
▯
Remove the glass
cover by unscrewing
it. Turn the glass coun-
terclockwise to
remove it.
▯
Remove the bulb. The
bulb unscrews coun-
terclockwise.
▯
Grasp the new bulb
with a clean, dry cloth
to prevent depositing
skin oils on the glass
which could lead to
premature bulb failure.
Replace the bulb by
screwing it in turning
the bulb clockwise.
▯
Screw the glass cover
back on.
▯
Turn power back on at
the main power supply
(fuse or breaker box).
Black Stainless
Surfaces
For black stainless steel and
anti-fingerprint surfaces, use a
soft, dry towel. For stubborn dirt,
use warm water diluted with a
non-abrasive, mild cleansing
soap. Never use stainless steel
polish.