9
3.
Change the recommended temperature using the control
knob.
4.
Press the
n
button.
The oven comes on. The display shows the
n
symbol.
5.
When the dish is ready, turn off the oven with the
%
button or
re-select and set.
Changing the temperature or grill setting
This can be done at any time. Turn the rotary selector to
change the temperature or grill setting.
Calling up the heating temperature
Press the
°
button briefly. The current heating temperature in
the cooking compartment is displayed for several seconds.
Pausing operation
Press the
n
button briefly. The oven is paused.
The
n
symbol flashes. Press the
n
button again, operation
continues.
To cancel working
Hold down the
n
button until the 3D hot air symbol
<
and a
temperature of 160 °C are displayed. You can now reprogram.
Setting the cooking time
See section
Time-setting options
, setting the cooking time.
Setting a later end time
See the section entitled
Time-setting options
, Setting a later end
time.
Setting the rapid heating function
The rapid heating is not compatible with all types of heating.
Compatible types of heating
When the programmed heating type is not compatible with
rapid heating, a warning signal is emitted.
Suitable temperatures
The rapid heating does not work when the set temperature is
below 100 ° C. If the oven temperature is slightly less than the
set temperature, rapid heating is not necessary. Not turned on.
Setting the rapid heating function
Press the button
c
for rapid heating. The
c
symbol is
displayed beside the temperature. The temperature control
bars fill up.
The rapid heating function has ended when all the bars are lit.
A brief signal sounds. The
c
symbol turns off. Put the food in
the oven.
Notes
■
Rapid heating is cancelled by adjusting the type of heating.
■
The programmed cooking time begins to run, regardless of
the rapid heating.
■
The oven temperature reached may be displayed while
heating by pressing on the button
°
.
■
To ensure uniform cooking, the food must not be put into the
oven until rapid heating has been completed.
Cancelling rapid heating
Press the
c
button. The symbol goes out.
Time functions
The time functions menu is accessed using the
0
button. The
following functions are available:
When the oven is off:
■
U
= set the timer
■
0
= set the time
When the oven is on:
■
U
= set the timer
■
r
= set the cooking time
■
p
= delay the end time
The square brackets around the symbol indicate that this
function has been selected. After pressing the
n
button, the
square brackets indicate the time function on the display panel.
Setting the time-setting options
in brief
1.
Press the
0
button to open the menu.
2.
Select the desired function with the
X
button.
3.
Set the desired value with the rotary selector.
4.
Press the
0
button to close the menu.
A detailed description of how to adjust each individual function
is provided below.
Short audible signal
If you cannot change or set a value, you will hear a short
audible signal.
Programming the timer
The timer works independently of the oven. It can be used as a
kitchen timer and programmed at any time. It does not matter
whether the oven is switched on or off.
1.
Press the
0
button.
The time function menu opens. The [
U
] symbol between the
square brackets indicates that the "Timer" function has been
selected.
2.
Set the time for the timer using the control knob.
3.
Close the menu with the
0
button.
The time indicator shows the time elapsed from the set time.
<
3D hot air
%
Top and bottom heating
6
Pizza function
