14
Before using the self-clean function
The oven must be empty. Remove accessories, pans, guides or
left and right hand side rails. See the
Cleaning and Care
chapter to release the guides or left and right hand side rails.
Clean the oven door and the side surfaces inside the oven
around the area with seals.
:
Risk of fire!!
The remains of food and grease as well as roasting juices can
catch fire. Use a damp cloth to clean the inside of the oven and
the accessories that will be cleaned inside the oven.
Cleaning of the accessories
The wire shelves or left and right hand side rails are not
suitable for self cleaning. Remove these from the oven.
For optimum cleaning of the oven interior, it is recommended
that the self-clean function is not used with the trays. However,
with the accessory support, the universal deep enamel tray or
the flat enamel oven tray can also be cleaned using the self-
clean function. Only clean one accessory at a time.
The shelf should not be cleaned using the self-clean function.
If your oven does not have this support, it can be purchased
from the Technical Assistance Service or over the Internet by
quoting part number 466546.
The accessory support is inserted to the right and left.
Use water to clean food remains, oil and roasting juices from
the accessories.
Place the universal deep tray or the flat oven tray on the
support.
:
Significant health risks!
Do not place non-stick baking tins or trays in the oven during
self-cleaning. The intense heat removes the non-stick surface
and creates toxic gases.
Setting the cleaning level
Once the cleaning level has been selected, set the oven.
1.
Press the
q
button.
The cleaning level 3 is displayed. Self-cleaning can be started
directly with the
n
button.
If you wish to change the cleaning level:
2.
Select the cleaning level with the control knob.
3.
Start with
n
.
The oven door is locked after starting. The
L
lock symbol lights
up. The oven door cannot be opened until the symbol is no
longer displayed.
Once cleaning has finished
The oven stops heating.
‹‹
:
‹‹
appears in the display.
Cancelling the setting
Switch off the oven with
%
. Do not open the oven door until
the
L
symbol disappears.
Adjusting the cleaning level
Once cleaning starts, the cleaning level can no longer be
changed.
Cleaning must take place at night
Cleaning can be programmed at night so the oven is available
during the day.See the
Time functions
chapter, delay cooking
time.
After using the self-clean function
Once the inside of the oven has cooled, clean the ash remains
using a damp cloth.
