English |
25
Bosch Power Tools
1 609 929 W38 | (26.7.10)
Switching Audio Operation On/Off
To
switch on
audio operation (radio and exter-
nal playback devices), press the On/Off button
38
. The display
39
goes on and the last set audio
source after switching off is activated.
When the radio charger is in the energy saving
mode (see “Energy Saving Mode”, Page 30),
press the On/Off button
38
twice to switch on
audio operation.
To
switch off
audio operation, press the On/Off
button
38
again. The current audio source set-
ting is stored.
Adjusting the Volume
To increase the volume, turn the
“Volume” 37
ad-
justment knob clockwise; to reduce the volume,
turn the adjustment knob anticlockwise. The vol-
ume setting (value between 0 and 20) appears
for a few seconds in indicator
d
on the display.
Before adjusting or changing a radio station, set
the volume to a lower setting; before starting an
external audio source, set the volume to medium.
Adjusting the Sound
An equalizer is integrated in the radio charger
for optimal sound reproduction.
The treble and bass setting can be manually
changed or sound pre-sets for various music
styles can be used. The following pre-pro-
grammed settings are available:
“JAZZ”
,
“
ROCK”
,
“POP”
and
“CLASSICAL”
apart
from the individually programmable setting
“CUSTOM”
.
To select one of the stored
sound pre-sets
,
press the
“Equalizer”
button
26
until the de-
sired setting is indicated in indicator
a
on the
display.
Changing the “CUSTOM” Setting
:
– Press the
“Custom”
button
28
once. The
“BAS”
indicator
c
flashes on the display and
the stored bass level flashes in indicator
d
.
– Set the desired bass level (value between 0
and 10). To increase the bass level, turn the
“Bass/Treb”
adjustment knob
37
clockwise;
to reduce the bass level, turn the adjustment
knob anticlockwise.
– To store the set bass level, press the
“Cus-
tom ”
button
28
a second time. The
“TRE”
in-
dicator
b
flashes in the display for the follow-
ing treble adjustment, and the stored treble
value flashes in indicator
d
.
– Set the desired treble level (value between 0
and 10). To increase the treble level, turn the
“Bass/Treb”
adjustment knob
37
clockwise;
to reduce the treble level, turn the adjust-
ment knob anticlockwise.
– To store the set treble level, press the
“Cus-
tom”
button
28
a third time.
Selecting an Audio Source
To select an audio source, press the
“Source”
button
34
until indicator
n
for the desired inter-
nal audio source (see “Setting/Storing Radio
Stations”, page 26) or external audio source
(see “Connecting External Audio Sources”,
page 26) appears in the display:
–
“FM”:
FM radio,
–
“AM”:
AM radio,
–
“AUX 1”:
External audio source (e.g. CD
player) via the 3.5 mm socket
40
on the side,
–
“AUX 2”:
External audio source (e.g. MP3
player) via the 3.5 mm socket
47
in the digit-
al media bay,
–
“USB”:
External audio source (e.g. USB
stick) via the USB port
45
,
–
“SD”:
External audio source (SD/MMC card)
via the SD/MMC slot
46
.
Setting the Rod Antenna
The radio charger is provided with a mounted
rod antenna
21
. For radio operation, point the
rod antenna toward the direction that enables
the best reception.
When the reception is insufficient, position the
radio charger at a different location that enables
better reception.
Note:
When operating the radio charger in the
direct vicinity of radio-communication equip-
ment or radio transceivers, the radio reception
can be subject to interference.
If the rod antenna
21
should become loose,
tighten it directly at the housing by turning in
clockwise direction.
OBJ_BUCH-1267-001.book Page 25 Monday, July 26, 2010 12:03 PM