12
Never dispose of the
batteries in a fire or
expose to high heat.
The batteries may
explode.
If GCY42 connectivity module is not
p u r c h a s e d w i t h t h e t o o l , o r i f t h e
r e p l a c e m e n t o f t h e m o d u l e o r t h e
b a t t e r y b e c o m e s n e c e s s a r y , p l e a s e
follow this procedure (See Fig. 7):
-
Using a flat screwdriver or a coin,
remove the cover
(25)
from the side
of the handle, by turning it 1/4 turn
counter-clockwise.
-
If the tool is already equipped with
the connectivity module, remove the
battery
(26)
, but do not remove the
connectivity module
(27)
.
-
If the connectivity module is installed
for the first time, remove the plastic
p l a c e h o l d e r
( 2 8 )
f r o m
t h e
connectivity module compartment,
and place the connectivity module
(27)
in the compartment observing
correct orientation.
Note:
Store the
placeholder
(28)
in a safe place.
Reinsert the placeholder again if the
communications module is removed.
-
Next place new battery
(26)
on the
top of the connectivity module with
the “+” polarity facing up.
-
Place the cover
(25)
over the battery
and turn it ¼-turn clockwise to lock
using a flat screwdriver or a coin.
Assembly
26
27
25
28
Fig. 7
2610067262 GDR GDS GDX18V-1860C 07-21.qxp_GDR GDX 7/16/21 7:30 PM Page 12
