Bosch FAS-420-TM страница 8 Скачать руководство пользователя

Страница: 8 / 104

en | Technical Specifications

FAS-420-TM Aspirating Smoke Detector

F.01U.088.878 | 4.1 | 2010.11

Operation Guide

Bosch Sicherheitssysteme GmbH

Technical Specifications

2.1

Product Description

Aspirating Smoke Detectors from the FAS-420-TM series are active fire detection devices that

are connected directly to the Local SecurityNetwork (LSN) improved version for early fire

detection. They are used for space and equipment protection as well as for monitoring air

conditioning units or ducts (provided that the FAS-420-TM is installed outside of these units

or ducts). You can also pinpoint the exact location of the fire using the innovative fire source

identification operation.

Local SecurityNetwork (LSN) improved version

FAS-420-TM series Aspirating Smoke Detectors were developed specifically for connection to

Bosch fire panels with LSN improved version technology and therefore offer the following

extended features:

–

Flexible network structures, including T-tapping with no additional elements

–

Up to 254 LSN-improved elements per loop or stub line

–

Unshielded cable can be used.

The FAS-420-TM series also offers all the established benefits of LSN technology. The

operating data and fault messages can be read off the fire panel's operating and display unit.

Variants

All FAS-420-TM series Aspirating Smoke Detectors have LED displays for operating mode,

malfunction and main alarm, and also offer an infrared diagnostics port. In addition to this,

the FAS-420-TM-R and FAS-420-TM-RVB variants offer an optical fire location display for up to

five zones. The FAS-420-TM-RVB also includes a pre-alarm display and a 10-segment smoke

level display.

Fire source identification

Innovative fire source identification technology allows the exact location of the fire to be

pinpointed by monitoring up to five distinct neighboring zones. To enable the emergency

response teams to intervene as quickly as possible, the location of the fire can also be

identified using the FNS-420-R LSN Strobes, for example, which are assigned to the various

monitoring ranges.

Sensitivity

FAS-420-TM series Aspirating Smoke Detectors have a response sensitivity of 0.5%/m to 2%/

m light obscuration. The sensitivity levels can be selected according to the area of application

using the fire panel's programming software (see

Section 4.4.3 Parameter Settings via

Programming Software, page 63

). The smoke level display on the FAS-420-TM-RVB model

allows a response sensitivity of 0.05%/m to 0.2%/m light obscuration.

With the new high-power light source technology, a broad detection spectrum including all

standardized fires is achieved (see

Section 3.4 Defining the Response Sensitivity, page 37

LOGIC×SENS

The intelligent signal processing LOGIC·

SENS

distinguishes between deception variables and

fire events in order to prevent false alarms.

Reliable airflow monitoring

Analogous to point-type smoke detectors, which are monitored electronically for wire breaks

and short-circuits, highly sensitive and dependable airflow monitoring is required for smoke

aspiration systems. The airflow sensors used in the FAS-420-TM series reliably detect

malfunctions such as pipe breakage or obstructions in the air sampling openings.

Содержание FAS-420-TM









































































































Результаты поиска

Содержание FAS-420-TM

Отзывы:

Похожие инструкции для FAS-420-TM

Бренды по названию

Популярные бренды

Bosch FAS-420-TM, Руководство по эксплуатации

Результаты поиска

Содержание FAS-420-TM

Отзывы:

Похожие инструкции для FAS-420-TM

Бренды по названию

Популярные бренды