Bosch EX85, Руководство по установке

Страница: 26 / 52

- 20 -
Install Selected
– function installs selected cameras and
verifies operation similarly to the
Install Cameras
function
in Basic mode. Only selected cameras will be installed,
and if no cameras are selected, all cameras available will
be installed.
Unselect All
– function deselects all cameras.
View Selected
– open a web-browser to view the selected
camera’s HTTP interface where users can watch live
video and configure the camera.
Edit Selected
– function allows editing the selected
camera’s IP address and camera description.
Add Remote Units
– function allows adding a camera
manually. Feature is designed to install a camera on
another sub-net that is not reachable by broadcasting.
This feature should only be used if the camera’s MAC and
IP addresses are known and connectivity has been
verified.
Save/Exit
– function saves the information of the installed
camera(s) into the “LocalMachine.ini” file and exports a
plaintext list of cameras into a “CameraList.txt” file for third
party software, then exits the installer.