background image

FCC & ICES compliance

FCC & ICES Information
(U.S.A. and Canadian Models Only)
This device complies with part 15 of the FCC Rules. Operation is subject to the following
conditions:

this device may not cause harmful interference, and

this device must accept any interference received, including interference that may cause
undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules and ICES-003 of Industry Canada. These
limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and
radiates radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference, in which case the
user will be required to correct the interference at his expense.
Intentional or unintentional modifications, not expressly approved by the party responsible for
compliance, shall not be made. Any such modifications could void the user's authority to
operate the equipment. If necessary, the user should consult the dealer or an experienced
radio/television technician for corrective action.
The user may find the following booklet, prepared by the Federal Communications
Commission, helpful: How to Identify and Resolve Radio-TV Interference Problems. This
booklet is available from the U.S. Government Printing Office, Washington, DC 20402, Stock
No. 004-000-00345-4.

UL Certification

UL Disclaimer
Underwriter Laboratories Inc. ("UL") has not tested the performance or reliability of the
security or signaling aspects of this product. UL Certification does not cover the performance
or reliability of the security or signaling aspects of this product.
UL MAKES NO REPRESENTATIONS, WARRANTIES, OR CERTIFICATIONS WHATSOEVER
REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING-RELATED
FUNCTIONS OF THIS PRODUCT.

Explosion Protected Certifications

Illuminator for Use in Hazardous Locations
Bosch Security Systems
LED-65 Illuminator models
12-24 VDC, 12-24 VAC, Class 2, 37 watts

File # E333679
Class I, Groups C and D; Class II, Groups E, F, and G; Class III
Class I, Zone 1, AEx db IIB T6; Ex db IIB T6 X
Zone 21, AEx tb IIIC T85°C Db
Ex tb IIIC T85°C Db X

1.6

1.7

1.8

8

en | Safety

EX65 Explosion-Protected Illuminator

2016.03 | 1.0 | F.01U.321.732

Installation Manual

Bosch Security Systems

Содержание EX65

































Отзывы: