background image

Warranty / Limitation of Liability

The unit has a 3 year warranty.
 
BOSCH Security Systems warrants that its products, at the time of shipment by BOSCH
Security Systems, are free from defect in material or workmanship under normal use and
service for the respective warranty periods specified in the applicable Price Schedule or as
otherwise published.
 
To assure conformance with operating limitations, Buyer should refer to the applicable data
sheet.
 
The warranty is void (i) if the Product is not operated in conformance with installation,
environmental, mechanical or electrical requirements, or within thermal stress limits, or (ii) to
the extent that any malfunction is the result of misuse, abuse, vandalism, neglect, improper
installation or application, alteration, accident, or negligence in use, storage, transportation,
or handling or if the original identification markings on the product have been removed,
defaced or altered, lightning, electricity, water, fire, environment or other hazard, or act of
God, or other impact outside of normal operating guidelines.
 
The foregoing warranty is subject to Buyer’s (i) promptly written claim and (ii) timely provision
to BOSCH Security Systems of an opportunity to inspect and test the Product claimed to be
defective. Such inspection may be on Buyer’s premises and/or BOSCH Security Systems may
request the return of the Product at Buyer’s expense. However, BOSCH Security Systems shall
not be responsible for packing, inspection, or labor costs in connection with the return of
Product. No Product shall be accepted for warranty service that is not accompanied by a
Return Authorization issued by BOSCH.
 
The liability of BOSCH Security Systems hereunder or otherwise is solely and exclusively
limited to replacement (new or refurbished Product), repair, or credit of the amortized
purchase price, as BOSCH Security may elect, for any Product which is returned by Buyer
during the applicable warranty period, or services for which timely notice of defect has been
given by Buyer, and which are found by BOSCH Security to be subject to adjustment under
this warranty.
 
BOSCH Security System’s warranty shall not be enlarged, diminished, or affected by, and no
obligation or liability shall arise or grow out of BOSCH Security’s rendering or technical
advice, facilities, or services in connection with Buyer’s order to the products furnished
hereunder.
 
For more information about the warranty on this product, see the Warranty Repair section on
Bosch’s Customer Care web page at www.boschsecurity.us/en-us/Service/CustomerCare.

 

1.10

EX65 Explosion-Protected Illuminator

Safety | en

11

Bosch Security Systems

Installation Manual

2016.03 | 1.0 | F.01U.321.732

Содержание EX65

































Отзывы: