9
3. MOUNTING - CAMERA BASE
Caution:
The selected mounting location should
not place the camera in a situation where its
environmental specifications could be exceeded.
See page 30. Ensure the selected location is
protected from falling objects, accidental contact
with moving objects, and unintentional
interference from personnel. Follow all applicable
building codes.
The following installation guidelines
must be followed:
•
Locate the camera such that it cannot be
easily interfered with, either intentionally or
accidentally.
•
Select a mounting surface capable of
supporting the combined weight of the
camera and mounting hardware under all
expected conditions of vibration and
temperature.
•
Secure all cabling.
•
Installations on drywall must use #8 screws
and #8 drywall nylon plugs or a superior
connection.
Содержание EX49
