Bosch DIP-5042EZ-0HD, Руководство по установке

Страница: 5 / 46

DIVAR IP 5000 Safety | en 5
Bosch Sicherheitssysteme GmbH 2016.03 | V1 | DOC
– Operate the device only from the type of power source
indicated on the label.
– Install in accordance with the manufacturer's instructions in
accordance with applicable local codes.
– Use only attachments/accessories specified by the
manufacturer.
– Protect all connection cables from possible damage,
particularly at connection points.
– Do not defeat the safety purpose of a polarized or
ground‑type plug.
– Permanently connected devices must have an external,
readily operable mains plug or all‑pole mains switch in
accordance with installation rules.
– Pluggable devices must have an easily accessible socket-
outlet installed near the equipment.
– Unplug the unit from the outlet before cleaning. Follow any
instructions provided with the unit.
– Any openings in the unit enclosure are provided for
ventilation to prevent overheating and ensure reliable
operation. Do not block or cover these openings.
– Leave approximately 5 cm (2 inches) clearance to the next
object.
– Do not place the unit in an enclosure unless proper
ventilation is provided, or the manufacturer's instructions
have been adhered to.
– Do not use this unit near water, for example near a bathtub,
washbowl, sink, laundry basket, in a damp or wet
basement, near a swimming pool, in an outdoor installation,
or in any area classified as a wet location.
– To reduce the risk of fire or electrical shock, do not expose
this unit to rain or moisture.
– Never push objects of any kind into this unit through
openings as they may touch dangerous voltage points or
short-out parts that could result in a fire or electrical shock.