Bosch DIP-5042EZ-0HD, Руководство по установке

Страница: 26 / 46

26 en | Maintaining the system DIVAR IP 5000
2016.03 | V1 | DOC
Bosch Sicherheitssysteme GmbH
See also:
– Obtainging a basic configuration
– Advanced configuration
9.2 Recovering the unit
Following procedures describe how to restore the software
default configuration and the factory default image.
Notice!
Before recovering DIVAR IP we recommend backing up the
configuration.
Option 1: The unit is in operation
4 Press the factory reset button on the back of the unit for
10 seconds. The software default configuration will be
restored. Data on the hard disks will not be deleted.
Option 2: The unit is switched off
4 Hold down the factory reset button on the back of the unit
and press the power button on the front. The factory
default image will be restored. Data on the hard disks will
not be deleted.
Notice!
For both options, you can access the unit’s website after
30 minutes.
See also:
– Backing up the configuration
9.3 Backing up the configuration
Following procedure describes how to back up the
configuration.