D621 Series
|
User's Guide | Select Watch Points (Cmd 63)
Bosch Security Systems | 8/04 |
48
Select Watch Points (Cmd 63)
o
I can perform this command.
o
I cannot perform this command.
The Watch feature gives you the ability to “watch” points
when the system is off. For example, parents with small
children may want a tone to sound whenever a door or
window is opened as a way of monitoring the location of the
children.
Once you have decided how your system responds to watched
points (refer to Select Watch Tone on page 46), you need to decide
which of the points in your system will be watched. Use this
command to tell your system which points to watch. You
cannot watch 24 hour or fire points.
Choosing which points to watch depends upon your goals. If
you have small children, you may choose to watch points of
entry and exit. Each time a watch point is faulted (a door or
window is opened), the keypad responds as programmed. For
example, you may tell your system to produce a short beep
when a watch point is faulted.
1.
Make sure your system is off (All and Part indicators are
off).
2.
Press [Cmd] [6] [3]. The keypad may prompt you to enter
a valid passcode by flashing the Cmd indicator.
3.
Enter your passcode if necessary. The keypad displays all
points that are currently being watched (Watch On).
•
Point Indicator On Solid: indicates point(s)
already being “watched.”
•
Point Indicator Flashing: indicates point(s)
available to be “watched.”
