D621 Series
|
User's Guide | Date And Time (Cmd 45)
Bosch Security Systems | 8/04 |
28
Date And Time (Cmd 45)
Use this command to program the system’s date and time.
1.
Ensure the system is turned off (All and Part indicators are
not illuminated).
2.
Press [Cmd] [4] [5]. The keypad may prompt you to enter
a valid passcode by flashing the Cmd indicator.
3.
Enter your passcode. The keypad lights Point 1 on the
display.
4.
Enter the date and time using the MM/DD/YY, HH:MM
format shown in Figure 12.
Figure 12: Date and time format
___
M
___
M
___
H
___
H
Month of
the year
Day of
the month
Current
Year
Hour of
the day
Minute of
the hour
/ ___
D
___
D
___
M
___
M
___
Y
___
Y
/
:
The keypad lights points 1 through 6 (each point
represents a digit to be entered) for the date and points 1
through 4 for the time
Figure 13: Date And Time Digit Indication On Keypad
1
2
3
4
5
6
7
8
9
10
11 12 13 14 15 16
All
Cmd
Part
Status
The time should be entered in 24 hour format
(8:00 p.m. = 20:00).
5.
After you enter the date and time, the keypad sounds a
long beep and automatically exits the Date and Time
command.
