D621 Series
|
User's Guide | Change a Passcode (Cmd 55)
Bosch Security Systems | 8/04 |
29
In the event of a power cycle (power is lost to the
system and then restored), the panel takes the
last event in the log and uses that as a starting
point for the time and date. Then, it alerts you to
enter the current time and date.
Change a Passcode (Cmd 55)
o
I can perform this command.
o
I cannot perform this command.
Use this command to change your passcode at any time. Only
use this feature under the direction of your security company.
Write down your old passcode and the new one before you
begin.
1.
Make sure your system is off (All and Part indicators are
off).
2.
Press [Cmd] [5] [5]. The keypad flashes the Cmd indicator
to prompt you to enter your passcode.
3.
Enter your current passcode. The keypad lights your user
number (1 to 16).
4.
Enter a new passcode with the same number of digits as
your old passcode. If the error tone sounds, try a different
new passcode.
5.
Enter your new passcode again.
