background image

D1260/D1260B 

|

 

Installation Guide | 2.0  

D1260/D1260B Overview 

 

Bosch Security Systems | 9/04 | 48101E 

 

2.0   D1260/D1260B Overview 

The D1260/D1260B Keypad is a SDI Bus compatible 
device used with the Bosch Control Panels with 
versions 6.40 or higher. If you need to upgrade your 
control panel, you can order the upgrade kits shown in 

Table 3 

at no charge. 

Table 3: 

Upgrade Kits 

 

Control Panel 

Upgrade Kit 

D9412G or D9412 

D9499-0640 or higher 

D9112 

D9199-0640 or higher 

D7412G or D7412 

D7499-0640 or higher 

D7212 

D7299-0641 or higher 

The D1260/D1260B features a keypad with keys that 
illuminate when pressed, a four-line by 20-character 
display, and a built-in speaker that emits several 
distinct warning tones. 

The control panel supplies all power and data 
requirements for the D1260/D1260B through a four-
wire connection. Refer to the 

Current Rating Chart for 

Standby Battery Calculations

 provided in the approved 

applications compliance guide for the specific control 
panel used with the D1260/D1260B to determine if 
you need an additional power supply.  

You can program the control panel to send messages 
identifying the supervised keypad that is in trouble to a 
central station receiver. To supervise a keypad, refer to 
the program entry guide specific to your control panel. 
If a keypad loses communication with the control panel 
for more than 15 sec, the keypad buzzes and 

Call

for Service

 

Contact us at:

 appears. Other 

keypads connected to the system show 

Service

Keypad

. The control panel transmits a serial device 

trouble report to the receiver. The keypad shows 

SDI

FAILURE #

 if the Modem IIIa

2

 communication format 

is used or 

TROUBLE ZN D

 if the BFSK communication 

format is used. For more information, refer to the 

D6600 Computer Interface Manual 

(P/N: 4998122703). 

 

Figure 1: 

D1260/D1260B Front Panels 

#

1

1

4

2

4

D1260B

D1260

3

3

3

4

2

4

3

 

1 -  LCD display  

(refer to 

Section 2.2.1 LCD Display

 on page 6

2 -  Digital keypad  

(refer to 

Section 2.2.2 Keypad

 on page 6) 

3-  Soft keys (refer to 

Soft Keys

 in 

Section 2.2.3 

Keypad Function Keys

 on page 6

4 -  Keypad function keys (refer to 

Section 2.2.3 

Keypad Function Keys 

on page 6)

 

 

Содержание D1260 Series





















Отзывы: