Bosch CR 10H, Руководство пользователя

Страница: 19 / 112

19 CR 10 H – 6720876740 (2017/08)
Product Information
Specifications
Product data for energy consumption
The following product data complies with the requirements of EU Regulation 811/
2013 as a supplement to Directive 2010/30/EU. The class of temperature controller
is required to calculate the central heating energy efficiency of an integrated system,
and it is therefore incorporated into the system data sheet.
1) Classification in accordance with EU Regulation No. 811/2013 for
identification of integrated systems
2) Contribution to seasonal energy efficiency of central heating in %
2.1 Function as room temperature-dependent controller (CO)
The CR 10 H controls the heat source via the room temperature. Only allowed with
timer in Germany. The user interface is not suitable for controlling heat sources from
other manufacturers.
Output control
The heat output of the heat source changes according to the deviation between the
current and required room temperature. This method of control is suitable for a
uniform temperature level, e.g. open-plan house. There are fewer burner starts and
shorter pump runtimes. This control mode may not be available depending on the
heat source that is connected.
Dimensions (W × H × D) 82 x 82 x 23 mm
Rated voltage 8 ... 16 V DC
Rated current 4 mA
BUS interface EMS 2 (2-wire BUS)
Control range 5 ... 30 °C
Permitted ambient temperature 0 ... 60 °C
Protection class III
Protection IP20
Function of CR 10 H Class
1)
[%]
1),2)
Room temperature-dependent, modulating V 3.0