32
Viewing Test Results
Active Fuel Injector Tester User Guide
Step 2—Upload the Data to the Shop Computer
1. Turn the MCU on.
2. Start the AFIT PC Application (if not already running).
3. Check the
Selected COM Port Num
and
Connectivity Status
at the bottom of the
application window.
• If the Connectivity Status indicator is
green
, proceed to step 4.
• If the Connectivity Status indicator is
red
or a message is displayed, you need to free the
selected COM Port from another application or select another
available
port:
From the Setup menu select
Choose Port
and select one of the available ports.
4. Select
ADD NEW
, or
EDIT
existing customer/vehicle information.
ADD NEW
—use to save first record to a new customer file
EDIT
—use for adding second test data to an existing customer
Note: the AFIT PC application stores only two test data records for each customer info
record—Balance 1/Flow 1 and Balance 2/Flow 2.
The first set of test results uploaded to a customer record are displayed in the
BALANCE 1/FLOW 1 graph and table. The second set of test results uploaded are displayed
in the BALANCE 2/FLOW 2 graph and table. Additional uploads to that customer record will
overwrite the BALANCE 2/FLOW 2 data.
TIP: To store additional test results, create a new customer record for that particular customer.
5. Click
Load Injector Data
in the AFIT PC application.
IMPORTANT! To avoid corrupting
the data, make sure the MCU is powered on before selecting.
6. On the MCU navigate to, and select
Upload Test Results
. Once AFIT completes the upload,
the unit returns to the
Injector Test
menu and the AFIT PC application displays the uploaded
test results.
7. In the AFIT PC application, click
SAVE
to retain information, or
CANCEL
to discard. Retained
customer records may be printed as reports at anytime.
For further details on using the AFIT PC application, please refer to the application’s help file.
