MY22B0a - 62_1.0_15.09.2021
120
Operation
6.16.2 Charging the battery
The battery can remain on the pedelec or can be
removed for charging. Interrupting the charging
process does not damage the battery. The battery
is fitted with a temperature monitoring system
which only allows charging within a temperature
range between 0 °C and 40 °C.
The ambient temperature during the charging
process lies within the range between 0 °C to
40 °C.
1
Remove the cable connection cover if
necessary.
2
Connect the mains plug of the charger to a
normal domestic, grounded socket.
3
Connect the charging cable to the battery's
charging port.
The charging process starts automatically.
The battery level indicator shows the charge
level during charging. When the drive system is
switched on, the
on-board computer
displays
the charging process.
The charging process is complete when the
LEDs on the battery level indicator go out.
4
Once charging is complete, disconnect the
battery from the charger.
5
Disconnect the charger from the mains.
Connection data
230 V, 50 Hz
Notice
Check that mains voltage! The power source
voltage must match the voltage indicated on
the charger nameplate. Chargers labelled
230 V may be operated at 220 V.
Notice
If an error occurs during the charging process, a
system message is displayed.
Remove the charger and battery from
operation immediately and follow the
instructions.
Содержание BULLS KIOX300
