MY22B0a - 62_1.0_15.09.2021
179
Maintenance
5
Use a 3 mm hex spanner to screw the valve lid
back on and tighten with a maximum of 0.5 Nm.
Figure 168: Fastening the cartridge valve lid
Setting the slipper clutch
1
Use 3 mm hex spanner to unscrew valve cap.
Figure 169: Unscrewing the valve cap
2
Secure the mounting interface against twisting
with a 24 mm open-end spanner.
Figure 170: Securing against twisting
3
Set the torque to 18 Nm with a torque wrench
and a 6 mm hex bit with a shaft length of at
least 25 mm. Rotate clockwise.
.
Figure 171: Setting in a clockwise direction
4
Use a 3 mm hex spanner to screw the valve lid
on and tighten with a maximum of 0.5 Nm.
Figure 172: Fastening the cartridge valve lid
Notice
The cartridge is not airtight without the valve
lid.
Notice
The cartridge is not airtight without the valve
lid.
Содержание BULLS KIOX300
