Bosch AVENAR 8000 Скачать руководство пользователя страница 86

Страница: 86 / 94

en | Control / Monitor

FPA-5000 | FPA-1200 | AVENAR panel 8000 |

AVENAR panel 2000 | AVENAR keypad 8000

2020-07 | 3.0 | F.01U.378.877

User Guide

Bosch Sicherheitssysteme GmbH

Control / Monitor

This chapter contains information about the following topics:
–

Activate doorholder, control element or HVAC, page 86

–

Go to element, page 86

–

Search for function, page 86

21.1

Menu overview

Control Monitoring

Activate doorholder

Activate HVAC

Activate control element Search function

Go to element

21.2

Activate doorholder, control element or HVAC

You can manually activate doorholders, control elements or climate systems.
1.

Press

Control Monitoring

Press the required button (

Activate doorholder

Activate control element

Activate

HVAC

) to open a list with all available elements of the required group.

Notice!

The individual control of each group is only possible for panel controllers with a premium
license.

Press the required element to start or stop the activation of this element immediately. Press

All On

to activate all elements or

All Off

to stop the activation of all elements at a time. Use

and

to scroll through the list. The element entries change their background

color according to their current state.
The background colors of the elements have the following meaning:
–

Red: Elements which are actively being controlled in case of an alarm

–

Fuchsia: Elements which are actively being controlled without a real alarm

–

Green: Elements which are not active

–

Yellow: Elements in fault or disabled, no control is possible.

21.3

Go to element

To search for an element which is connected to the system:
1.

In the start menu, select

Search function / element

Go to element

Three different lists are offered.

Select a list, e.g.

By description

A list of the detectors is displayed.

Select the list field you require.
Different selection fields may be offered for the selected element (e.g.

Bypass

). What

is displayed depends on:
–

the message types (e.g. fault, alarm etc.) that can be assigned to this element.

–

the mode (e.g. bypassed, reset etc.) that the selected element is in.

21.4

Search for function

To search for a:
1.

In the start menu, select

Control Monitoring

Содержание AVENAR 8000































































































Результаты поиска

Содержание AVENAR 8000

Отзывы:

Похожие инструкции для AVENAR 8000

Бренды по названию

Популярные бренды

Bosch AVENAR 8000, Руководство пользователя

Результаты поиска

Содержание AVENAR 8000

Отзывы:

Похожие инструкции для AVENAR 8000

Бренды по названию

Популярные бренды