manualshive.com logo in svg

Bosch AVENAR 4000 FAH-425-T-R, Руководство по эксплуатации

Поделиться
Скачать
Bosch AVENAR 4000 FAH-425-T-R Скачать руководство пользователя страница 8

TP4 400 Support Plate

 

The TP4 400 Support Plate is intended for an installation
height up to 4 m and is designed for labels up to a size of
approx. 65 x 34 mm.

15 / 4

TP8 400 Support Plate

 

The TP8 400 Support Plate is intended for an installation
height up to 8 m and is designed for labels up to a size of
approx. 97 x 44 mm.

SK 400 Protective Basket

The SK 400 Protective Basket is installed over the detector
and gives the detector substantial protection against
damage.
If the detector is mounted in a sports facility, for example,
the protective basket prevents balls or other sports
equipment from hitting the detector and damaging it.

SSK 400 Protective Dust Cover

The SSK 400 Protective Dust Cover is necessary during
construction work to protect an installed detector base,
with or without detector module, from contamination. The
protective dust cover made of polypropylene (PP) is
pushed onto the installed detector base.

MK 400 Detector Console

The MK 400 Detector Console is used to install detectors
above door frames or similar in compliance with DIBt.
The console is supplied with a pre-mounted MS 400
Detector Base (the detector shown is not included in the
scope of delivery).

8

en | System Overview

AVENAR detector 4000

2014.11 | 1.1 | F.01U.283.550

Operation Guide

Bosch Sicherheitssysteme GmbH

Содержание AVENAR 4000 FAH-425-T-R







































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды