Bosch Autodome IP 4000 HD, Руководство по эксплуатации

Страница: 36 / 60

If you select Off, no automatic recording takes place.
!
Caution!
You can specify limitations for overwriting older recordings in Continuous mode by
configuring the retention time (see Retention Time).
Stream
Select the stream to be used for standard recordings:
–
Stream 1
– Stream 2
– I-frames only
Alarm recording
Pre-alarm time
You can select the required pre-alarm time from the list field.
Post-alarm time
You can select the required post-alarm time from the list field.
Alarm stream
Select the stream to be used for alarm recordings:
–
Stream 1
– Stream 2
– I-frames only
Encoding interval and bit rates from profile
Select this checkbox and then select an encoder profile to set the associated encoding
interval for alarm recording.
Alarm triggers
Alarm input / Analysis alarm / Video loss
Here you can select the alarm sensor that is to trigger a recording.
Virtual alarm
Here you can select the virtual alarm sensors that are to trigger a recording, via RCP+
commands or alarm scripts, for example.
Notice!
For more information, please see the Alarm Task Script Language document and the RCP+
documentation. For the latest version of these documents access your Bosch product catalog
on the Internet.
Export to account
Select this parameter if you want all alarm recordings to be exported to an FTP server
automatically. Make sure to have inserted all relevant data for FTP posting.
Maximum Retention Time
Recordings are overwritten when the retention time entered here has expired.
4
Enter the required retention time in days for each recording track.
Make sure that the retention time does not exceed the available recording capacity.
Recording Scheduler
The recording scheduler allows you to link the created recording profiles with the days and
times at which the camera's images are to be recorded in the event of an alarm.
7.3
7.4
36 en | Recording
AUTODOME IP 4000 HD / AUTODOME
IP 5000 HD/IR
2016.04 | 0.4 | Operation Manual Bosch Security Systems