Bosch Access Easy Controller 2.1, Руководство по установке оборудования

Страница: 30 / 136

30 en | 4-Reader Board Access Easy Controller 2.1
2018.11 | 1.0.6 | F.01U.122.796 Hardware Installation Manual Robert Bosch (SEA) Pte Ltd
6.1.12 Address Setting Switch
Reference: SW1
SW1 is switch to set the address of individual interface boards. It consists of two dip switches
for setting of the address in binary sequence. Each AEC2.1 can manage up to eight 4-Reader
boards and eight 8-IO boards. The address settings for the 4-Reader boards are shown in the
table below.
Address setting using SW1 for
the 1
st and 5 th 4-Reader board in
AEC2.1 system.
1 2 3
ON
1 2 3
ON
1 2 3
ON
1
2 3
ON
The 1 st 4-Reader board will
consist of readers 1 to 4
The 5 th 4-Reader board will
consist of readers 17 to 20
Address setting using SW1 for
the 2
nd and 6 th 4-Reader board in
AEC2.1 system.
The 2 nd 4-Reader board will
consist of readers 5 to 8
The 6
th
4-Reader board will
consist of readers 21 to 24
Address setting using SW1 for
the 3
rd and 7 th 4-Reader board in
AEC2.1 system.
The 3 rd 4-Reader board will
consist of readers 9 to 12
The 7
th 4-Reader board will
consist of readers 25 to 28
Address setting using SW1 for
the 4
th and 8 th 4-Reader board in
AEC2.1 system.
The 4 th 4-Reader board will
consist of readers 13 to 16
The 8
th 4-Reader board will
consist of readers 29 to 32
Notice!
The boards are addressed in binary sequence. AEC2.1 can support up to 16 interface boards,
eight 4-Reader boards and eight 8-IO boards. The address pin ‘1’ is reserved for future
development, to expand the capability of AEC2.1.
6.1.13 Factory Default Setting
Reference: JP2
JP2 of the first 4-Reader board is used to reset the AEC2.1 back to factory default. JP2 carries
two functions:
– Clearing all information, settings and configuration. (IP address will not be reset with this
function)
– Resetting the IP address of the panel back to default IP