![background image](http://html.mh-extra.com/html/bosch/0-607-161-100/0-607-161-100_original-instructions-manual_41292020.webp)
20
| English
1 609 92A 37G | (19.9.16)
Bosch Power Tools
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions.
Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the fold-out
page with the illustration of the pneumatic tool and leave it
open.
Intended Use
The pneumatic tool is intended for drilling in wood, metal, ce-
ramics and plastic.
Product Features
The numbering of the product features refers to the illustra-
tions on the graphics page. The illustrations are partly sche-
matic and may differ from your pneumatic tool.
1
Drill spindle
2
Clamping area (collar)(e. g. for an auxiliary handle)
3
On/Off switch (lever)
4
Utility clip
5
Hose fitting
6
Spanner flats on the drill spindle
7
On/Off switch
8
Air outlet with silencer
9
Auxiliary handle*
10
Fastening slots for utility clip
11
Hose clamp
12
Exhaust-air hose
13
Fastening screw for attachment cover
14
Attachment cover
15
Air outlet with hexagon nut
16
Sealing ring
17
Exhaust-air set (decentralised)
18
Connection socket on exhaust-air set
19
Silencer on exhaust-air set
20
Connection socket at air intake
21
Supply-air hose
22
Exhaust-air hose, central
23
Key type drill chuck
24
Keyless chuck
25
Chuck key
26
Tool holder
27
Rear sleeve
28
Front sleeve
29
Rotational direction switch
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under “Technical data” complies with all applicable
provisions of the directive 2006/42/EC including its amend-
ments and is in conformity with the following standards:
EN ISO 11148-3.
Technical file (2006/42/EC) at:
Robert Bosch Power Tools GmbH, PT/ETM9,
70538 Stuttgart, GERMANY
Robert Bosch Power Tools GmbH
70538 Stuttgart, GERMANY
Stuttgart, 01.01.2017
Technical Data
Henk Becker
Executive Vice President
Engineering
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
0 607 153 5../0 607 154 101
These pneumatic tools belong to the CLEAN product line.
Through its oil-free operation and reduced air and energy con-
sumption, Bosch’s CLEAN technology is operator-ergonomic
and helps save the environment.
Operation with air containing oil is also possible.
consumption optimized – C
lubrication-free
– L
ergonomic
– E
air tool
– A
noise reduction
– N
OBJ_BUCH-1540-004.book Page 20 Monday, September 19, 2016 2:47 PM