Bort 93412857, Руководство пользователя

Страница: 10 / 28

10
steam inside the tank, filling the empty space . if there is
no empty space inside the tank, the unit will not be able
to generate any steam;
5 . Check the power supply and socket, and confirm they
comply with the requirements given in the User Manual .
Then turn on the power supply;
6 . After itis plugged in, the round light at the bottom will
turn on, indicating that the unit is heating up and pres-
sure is increasing, When the light turns off, it means the
Steam Cleaner is ready for use . At this time, lightly press
the steam button and check whether steam is sprayed
out of the nozzle . (Do not aim the spray nozzle at other
persons or objects);
7 . If there is steam sprayed out, please install suitable
accessories according to your needs after you release
the button;
8 . Press down the steam button again in order to carry
out the operations required by you .
After the machine is used:
1 . After the cleaning machine is used, unplug the power
cord and disconnect the power supply;
2 . Press down the steam button to release the pressure
until no steam is injected out;
3 . Slowly unscrew the safety cap but do not remove it,
and residual steam will be discharged slowly until no
steam comes out . Then place the machine in a cool place
to cool it down for about five minutes . Finally, complete-
ly remove the safety cap;
4 . Empty the residual water in the tank and clean the ex-
ternal surface with a piece of dry loth;
5 . Then re-install the safety cap onto the machine body
and tighten it in position .
Installation of accessories
1. Installing the spray cup with brush.
Hold the pipe section of the spray cup with brush in your
hand . Align the arrow on the spray cup with the sin-
gle-line mark on short spray nozzle on the machine body .
Insert the spray cup in position . Rotate the spray cup in
clockwise direction .
Align the arrow on the spray cup with the double-line
mark on short spray nozzle on the machine body, as
shown in Figure 1 . Fix the spray cup on the machine
body .
To remove the spray cup with brush:
Rotate the spray cup inversely (counterclockwise) as
shown in Figure 2 . Align the arrow on the spray cup with
the single-line mark on the machine body . The spray cup
with brush can now be pulled out .
2. Installation of short spray nozzle:
Aim the spray cup with round brush or bent spray cup at
the top of spray nozzle, as shown in Figure 3 .
Push the spray cup upwards until itis in position .
As the short spray nozzle and spray cup are positioned
in six directions, the angle and direction can be adjusted
during the installation .
3. Use of fabric steamer tool:
1 . Place towel sleeve (12) over fabric steamer tool (13);
2 . Attach to the extended connecting spray (6) for re-
freshing and removing wrinkles on clothing or drapes;
3 . Hang clothing from a shower rod or clothes hook using
a sturdy clothes hanger;
4 . Activate steam cleaner and move tool over fabric, tak-
ing care not to concentrate steam in a single area .
4. Installation of window/door cleaning tool
To clean windows and doors easily, attach the window/
door cleaning tool (14) to the fabric steamer tool (13) .
Attach the accessory to the extended connecting spray
and clean your windows and doors easily with the rub-
ber wiper (fig . 4) . To remove the window/door cleaning
tool, simply pull the tab to release the fabric steamer tool
(fig . 5 .)
To refill the water during operation:
1 . Unplug the power cord and disconnect the power
supply;
2 . Press down the steam button to release the pressure
until no steam is sprayed out;
3 . Slowly unscrew the safety cap but do not remove it,
and residual steam will be discharged slowly until no
steam comes out . Place the machine in a cool place to
cool it down for about five minutes . Finally, completely
remove the safety cap;
5 . Use the funnel and measuring cup to refill a suitable
quantity of cold or hot water into the tank;
6 . Re-install the safety cap onto the machine body and
tighten it in position .
WARNING: The device should be dis -
connected from the mains after use and
before cleaning.
DISPOSAL
Discarded electric appliances are recyclable and
should not be discarded in the domestic waste!
Please actively support us in conserving resourc-
es and protecting the environment by returning
this appliance to the collection centres (if available) .
Made in China .