Page 15
IX. Maintenance
After finishing smoking, disconnect the generator and the smoking unit from the power
supply. It is necessary to clean the smoker: it is best to use water with washing-up liquid. The
interior of the smoker should have residue after smoking, it should not be scrubbed or washed
with caustic agents. If there is fat or other deposits on the housing, wipe them gently with a
damp cloth.
The shutter and the bowl in which fat and ash are collected, must be kept clean because
excess fat may ignite.
NOTE: When smoking excess fat falling very fat products, control on the shutter, it must be
removed unconditionally.
NOTE: During the operation of the device, carbon deposit forms on the part of the sawdust
feeder. It should be removed after 8 hours of the generator operation, using a scraper, pliers or
other blunt tool. Failure to remove carbon deposits can result in poor operation of the device
and, in the worst case, its damage.
