BOREAL LASER GasFinder FC, Руководство по эксплуатации

Страница: 19 / 88

3.5
Boreal Laser Inc. GasFinderFCr Operation Manual — Installation July 17th 2017
Red aiming
laser input
I.R. laser input
Aiming scope
Vertical
locking screws
Cross hair adjustment
screw covers
Horizontal
locking screws
Vertical
alignment screw
1 turn - 2.0 mrad
Coaxial output
Horizontal
alignment screw
1 turn - 2.6 mrad
Installing the Mount and the Stainless Steel Enclosure
Caution. care should be taken not to get the fi ngers trapped between the cover
and the sides of the base, especially before the shocks have been
connected.
Remove the enclosure from the packing case, open the cover •
and remove the base and the nose from inside.
There is a tubular spring loaded support laying at either side of the •
base. Remove the plastic bag and attach the front of the support
to the front of the cover.
Attach the nose to the front of the base by inserting the tabs on the nose into the slots •
OP3 Open Path Transceiver (Remote Head)
This Remote Head is designed to be used for path lengths up to 750m. It can be fi tted in an
enclosure and uses an X-Y mount and scope for alignment. It can also be used mounted on
a tripod for portable use.
Nose
Base
Top
cover
Support