BOREAL LASER GasFinder FC, Руководство по эксплуатации

Страница: 18 / 88

3.4
Boreal Laser Inc. GasFinderFCr Operation Manual — Installation July 17th 2017
Transceivers (Remote Heads, Duct Probes)
There are various types of transceivers to which the GasFinderFCr can be connected:
- OP1
- OP3
- V1
OP1 Transceiver (Remote Head)
This Remote Head is designed to be used for path lengths up to
50m. It has a weather resistant stainless steel assembly and has an
adjustable base. It is mounted with a single 12mm bolt and locking
screws if required.
Mount the Remote Head directly to a galvanised steel plate •
at least 100mm square. Rotate the unit so that the head is aligned with the refl ector.
Tighten the 12mm bolt.
Remove the 8 screws from the rear plate. •
Connect a visible laser to the fi breoptic laser connector •
at the rear of the unit. Align the Remote Head until the
red dot appears on the refl ector.
Connect the fi breoptic and coaxial cables to the rear •
connectors and to the GasFinderFCr and switch on.
Make a fi nal alignment adjustment by maximising the •
light return value. Tighten all the locking screws and
secure the cables, making sure that the weight of the
cables does not alter the alignment of the Remote
Head.
OP1 Head
2 OP1 Heads
Refl ector for a 100mm path
8 fastening screws
Co-ax connector
Laser connector
Horizontal
alignment screw
Vertical
alignment screw