bora Pro PKG3, Инструкции по эксплуатации и монтажу

Страница: 22 / 44

EN
22
Installation
www.bora.com
Standard cooking zone connection
5 4
3
2
1
Fig. 5.24 Standard connection of appliances that connect at
the front
[1] Cooktop
[2] Rear cooking zone (zone 2)
[3]
Front cooking zone (zone 1)
[4]
Rear cooking zone control knob (zone 2)
[5] Front cooking zone control knob (zone 1)
Connecting the cooking zones when the cooktop is
installed rotated by 180°
5 4
3
2
1
Fig. 5.25 Connecting the cooking zones when the cooktop is
installed rotated by 180° and the ports are on the
front of the appliance
[1] Cooktop
[2] Rear cooking zone (zone 1)
[3] Front cooking zone (zone 2)
[4] Rear cooking zone control knob (zone 1)
[5]
Front cooking zone control knob (zone 2)
5.8 Establishing communication and
power connection
X
X
Observe all safety and warning information (see the “Safety”
chapter).
X O
The plug for the power supply must be accessible following
installation.
X O
If the power supply cable has been damaged this must be replaced.
i
The appliance components are linked by the ribbon cable
provided.
5.8.1 Connecting the control knobs
i
Control knobs must only be connected to the ports
provided on the appliance.
1
Fig. 5.22 Back of control knob with port
[1] Port on the back of the control knob
X
X
Connect the control knobs to the appliances.
Connecting the control knobs to the cooktop
i
In the normal set-up the ports are on the front of the cooktops.
i
According to the default settings, the left control knob
operates the front cooking zone (zone 1) and the right
control knob operates the rear cooking zone (zone 2).
3 2 1
ZONE1 INTERF. COM1 ZONE2
Fig. 5.23 Ports on the cooktop
[1] Front cooking zone control knob port (zone 1)
[2] Extractor electronics interface port
[3]
Rear cooking zone control knob port (zone 2)