EN
33
Functions and operation
www.bora.com
Setting the time and starting the timer
i
Turning clockwise increases the time (starting at
0 minutes). Turning anticlockwise reduces the time.
5
6
7
Fig. 7.14
Turning the knob ring clockwise
5
6
7
Fig. 7.15
Turning the knob ring anticlockwise
X
O
In the range from 0 to 20 minutes, the time reduces/
increases in both directions by one minute at a time, while the
increments are 5 minutes for the rest of the range.
X
O
After confirming with a touch command, an acoustic signal
is heard, the cooking zone timer is activated and the set time
starts to count down.
X
O
The control knob display changes to the current cooking
session and the timer symbol is displayed.
X
O
The set power level and the remaining time are shown
alternately in the control knob display for 3 seconds.
X
O
Once the remaining time is less than 2 minutes, only the
remaining time is displayed.
X
O
Once the remaining time is less than 5 seconds, the remaining
time flashes.
Changing active timers
X
X
Repeat the steps for cooking zones with an active timer (see
“Activating cooking zone timers”).
X
X
Change the set time and restart the timer.
Switching the timer off early
If the cooking session is to be continued:
X
X
open the cooktop function menu;
X
X
select the menu item “timer function (automatic cut-off)”;
X
X
decrease the set time to
000
and confirm the entry.
X
O
The timer is deactivated early and an acoustic signal is heard.
X
O
Active cooking sessions are resumed unchanged.
If the cooking session is to be ended:
X
X
turn the knob ring to power level
0
X
O
An acoustic signal sounds and the cooking zone is switched off.
Time lapsed
X
O
The cooking zone switches off automatically.
X
O
An acoustic signal is heard.
X
O
0 0 0
and the timer symbol can be seen flashing in the
control knob display.
X
O
After 5 seconds the acoustic signal and the flashing display
are automatically deactivated.
i
The flashing display and acoustic signal can be stopped
early with a touch command on the control knob.
X
O
If necessary, the residual heat indicator
H
is then displayed.
7.4.3 Automatic heat up function
When the automatic heat up function is activated, the cooking
zone works at full power for a certain time and is then
automatically reset to the previously set level.
The system automatically determines the heating time
depending on the power level set.
PKG3
Power level (continuous cooking
level)
Cooking times in min:sec
1
00:40
2
01:00
3
02:00
4
03:00
5
04:20
6
07:00
7
02:00
8
03:00
Tab. 7.4
Overview of heating times
i
If the cooking zone power level is increased while the
automatic heat up function is active, the automatic heat
up function remains active. The heating time is adjusted
accordingly.
i
If the cooking zone power level is decreased while the
automatic heat up function is active, the automatic heat
up function is deactivated.
Requirement for the automatic heat up function:
X
O
cooking session with a power level between 1 and 8.
Содержание Pro PKG3
Страница 41: ...EN 41 Notes www bora com 12 Notes...
Страница 42: ...EN 42 Notes www bora com...
Страница 43: ...EN 43 Notes www bora com...
