bora PKT11, Инструкции по эксплуатации и монтажу

Страница: 20 / 32

EN
20
Installation
www.bora.com
0° or 180° installation
In menu option
C2
, you can set whether the cooktop is
installed rotated around 180°.
Setting Display
C 2 0
Installation 0° Factory setting
C2 1
Installation 180°
Tab. 5.7 Installation direction
INFO For installation rotated around 180°, the
C2 1
assign the correct cooking zones inside the
control knob display.
Type of control knob display
In the
C3
menu option, you can set whether the control
knob display should show the temperature, the power
level or a combination of the two.
Setting Display
C 30
Temperature display in °C Factory setting
C3 1
Power display
C 32
Combination display
Tab. 5.8 Control knob display
Control knob display options
Temperature
levels
Low temperature
levels
C30 C31 C32
80° C
80 80
90° C
90 . 90
100° C
100 100
110° C
1 10 : 1 10
120° C
120 120
130° C
130 * 130
140° C
140 140
150° C
150 1 1
160° C
160 2 2
170° C
170 3 3
180° C
180 4 4
190° C
190 5 5
200° C
200 6 6
210° C
2 10 7 7
220° C
220 8 8
230° C
230 9 9
250° C
250 P P
Tab. 5.9 Control knob display options
5.6.3 Changing the setting
X X
Turn the knob ring clockwise to increase the value.
X X
Turn the knob ring anticlockwise to decrease the value.
The following menu options are available:
Menu options
C 0
Volume of warning beep
C 1
Select operating mode (normal mode or demo mode)
C 2
0° or 180° installation
C 3
Type of control knob display
Tab. 5.4 Menu options in the configuration menu
X X
Touch the touch surface on the control knob again for
1 second to confirm the menu you want.
Q Q
The sub-menu is accessed and the display switches to
a three-character combination (e.g.
C23
).
INFO In the three-character combination shown, the
right-hand figure shows the value saved in the
system.
Setting the volume of the warning beep
Once you have confirmed menu option
C0
, you can set
the volume of the warning beep.
Setting Warning beep volume
C 00
100% (max. volume)
C0 1
10% (min. volume)
C 02
20%
C 03
30%
C 04
40%
C 05
50%
C 06
60% Factory setting
C 07
70%
C 08
80%
C 09
90%
Tab. 5.5 Warning beep volume
Select mode
When you have confirmed menu option
C 1
, you can select
the operating mode.
Setting Mode
C 1 0
Normal operating mode Factory setting
C 1 1
Demo mode
Tab. 5.6 Operating modes
INFO All the control knob functions are available
in demo mode. The heating function for the
cooktop is deactivated. Demo mode is used,
for example, for exhibitions.