13
13
This section explains how to start a new ride. To start a ride, you must connect
the sensor and then either continue your previous ride or start a new ride.
Connecting the Sensor
Each time you wake the NODE or switch it to On, it automatically tries to
communicate with the sensor. This is called “connecting.” For the NODE to
connect to the speed sensor, the wheel must turn.
The display during Connecting
During the Connecting process, the display shows CONNECTING SENSORS
and the lower right corner of the display flashes the ‘receiving’ icon (Figure 24).
This process can take as long as a minute to complete. The NODE shows the
connected sensor in the upper left corner of the display (Figure 25).
After connecting, the display shows NEW RIDE?
Force Connect
If your NODE did not connect correctly, you can “Force Connect,” making
the NODE repeat the connecting procedure. In Ride mode, hold
s 2
for three
seconds and then make the sensor send a signal (Figure 26).
Figure 24. Connecting to Sensors.
STARTING A RIDE
Figure 25. Connected Sensors.
Sensor icons
(3 seconds)
Figure 26. Force Connect.
1.
2.
NEW RIDE?
1. To change the value (choose
YES
or
NO
), press
s 2
.
2. To select, press
s 1
.
YES
NO
Trip data
Erased
Saved
Trip Clock
0:00:00
Starts from previous time
Backlight
Switches to On for 5 seconds
Switches to RIDE mode
Switches to RIDE mode
s2
s1
s1
s2
