10
•The cooktop shall be installed such that better heat radiation can be ensured to
enhance its reliability.
•The wall and induced heating zone above the work surface shall withstand heat.
•To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
•A steam cleaner is not to be used.
•This ceramic can be connected only to a supply with system impedance no more
than 0.427 ohm. In case necessary, please consult your supply authority for
system impedance information.
CONNECTING THE COOKTOP TO
THE MAIN POWER SUPPLY
The power supply should be connected in compliance with the relevant standard,
or a single-pole circuit breaker. The method of connection is shown as below.
For 4-wire cable from home power supply
Red wires
Red wires
Green ground wires
Yellow/Green ground wires
Cable from home
power supply
Black wires
Black wires
3-wire cable from cooktop
White wires
Содержание IC8901
Страница 1: ...Operation Instructions Model IC8901 Induction Cooktop www bonsenkitchen com ...
Страница 2: ......