BonsenKitchen IC8901, Руководство по эксплуатации

Страница: 28 / 32

HINTS AND TIPS
The cooktop cannot
Be turned on.
The touch controls are
difficult to operate.
Some pans make
crackling or clicking
noises.
The touch controls are
unresponsive.
The glass is being
scratched.
The induction cooktop
makes a low humming
noise when used on a
high heat setting.
Fan noise coming from
the induction cooktop.
No power.
There may be a slight film of
water over the controls or you
may be using the tip of your
finger when touching the
controls.
This may be caused by the
construction of your cookware
(layers of different metals
vibrating differently).
The controls are locked.
Rough-edged cookware.
Unsuitable, abrasive scourer or
cleaning products being used.
This is caused by the technology
of induction cooking.
A cooling fan built into your
induction cooktop has come on
to
prevent the electronics from
overheating. It may continue to
run even after you’ve turned the
induction cooktop off.
Make sure the cooktop is connected
to the power supply and that it is
switched on.
Check whether there is a power
outage in your home or area. If you’ve
checked everything and the problem
persists, call a qualified technician.
Make sure the touch control area is
dry and use the ball of your finger
when touching the controls.
This is normal for cookware and
does not indicate a fault.
Unlock the controls. See section
‘Using your ceramic cooktop’ for
instructions.
Use cookware with flat and smooth
bases. See ‘Choosing the right
cookware’.
See ‘Care and cleaning’.
This is normal, but the noise should
quieten down or disappear completely
when you decrease the heat setting.
This is normal and needs no action.
Do not switch the power to the
induction cooktop off at the wall
while the fan is running.
What to do Possible causes Problem
24