INO 36 DISHWASHER Code NU271700-11/97-Ind.B-01/99
Chap.5 - Page 3
SERVICE - SERVICE - SERVICE - SERVICE - SERVICE - SERVICE -
* REGENERATION___________________________________________________________________
*
Check the filling of the regenerating salts vat
*
The periodicity
has been noted by the fitter in the
*Open the door
* Press the drain control switch
board below
(option) or remove the
overflow tube.
It depends on the water hardness and
the quantity of racks of crockery washed per day
* When the tank is empty,
press the drain control switch
again, or place the overflow tube.
* Close the door
* Press the regeneration control switch during 2 to 3 seconds.
These data are just indications. The regeneration is necessary
if there is a white deposit on the glasses.
The regeneration pilot light lights up
during the cycle (about 20 mn).
Before each regeneration check the quality of salt in the salt vat
(paragraph 3 - 4), the vat capacity allows three regeneration cycles.
When the pilot light is off
the regeneration is over
.
* Drain the tank again
and switch off the appliance.
NOTA : The regeneration must only start when the tank is empty.
Warning :
The start of the regeneration cycle forbids the dishwasher operation.
* REGENERATING SALTS VAT FILLING_____________________________________
- Fill the salt vat with a proper coarse salt or pastille. Close
the vat.
Degree Th
10
15
20
25
30
35
40
Nber.racks/h
5
9 days 6 days 5 days 4 days 3 days 3 days
8
8 days 5 days 4 days 3 days 3 days
10
7 days 5 days 4 days 3 days
13
6 days 4 days 3 days
15
4 days 3 days
18
4 days
20
4 days
25
3 days
30
3 days
35
3 days
40
45
50
After each operation
Every 2 days
Every 2 days
