INO 36 DISHWASHER Code NU271700-11/97 – Ind.A-04/98
Chap.2 - Page 1
INSTALLATION - INSTALLATION - INSTALLATION - INSTALLATION - INSTALLATION -
Connections type and positionning. See "Technical data" at the beginning of the manual.
* GENERAL REQUIREMENT
_________________________________________________________________________
The installation, modification or repair of the appliance must be performed according to professionnal standards by a
specialised fitter.
* HANDLING
__________________________________________________________________________________________
Handling must only be performed with the appropriate hoisting equipment.
If the appliance is to be transported, it must be carried on its original pallet and in no event be placed on top of other
appliances.
If it is to be moved without its pallet the appliance must be carried and not pulled.
* UNPACKING
___________________________________________________________________________________
-Separate the base of the appliance by removing the 2 M10
screws located beneath the base.
- Pull out the electric cable located at the rear of the appliance
under the tank.
.
Dishwasher without hoist
-Screw the 4 jacks under the dishwasher to adjust the height
(jacks are provided in a bag inside the appliance).
Dishwasher with hoist
- Screw the 4 jacks to the leg ends.
-Place the appliance on the hoist and join by means of the 4
screws supplied with the hoist.
NOTA
: Use the jacks to level the dishwasher
.
