INO 36 DISHWASHER Code NU271700-1197-Ind.A-04/98
Chap.3 - Page 2
OPERATION – OPERATION – OPERATION – OPERATION
* End of operation______________________
* Open the door
* Open the door
* If your appliance is not equipped with an external
wash meter, introduce the detergent respecting the
quantity recommended by the manufacturer. (Tank
capacity = 24 liters)
* Introduce a rack of dirty crockery.
* Unfit the overflow tube without taking it out of the filter,
if tank drain pump option press the drain control switch on
“ On ” position.
* Set the program selector on the desired wash cycle.
* Remove the eventual scraps from the tank. Take out and
clean the filter.
* Press the drain control switch on “ Off ” position (option).
* Close the door.
* Put the filter and the overflow tube, and wash the tank
with a disinfectant product. To do this, fill the tank again
and start a washicycle.
* Press the cycle start switch. The cycle starts.
* At the end of the cycle, open the door.
The pilot light of development of the program lights up.
* Check the wash turnstiles can turn freely. If a nozzle is
blocked, see chapter "Turnstiles removal".
* Drain the tank
* Put the On/Off switch on "Off" position.
At the end of the cycle, open the door.
* Take out the rack of clean crockery.
* Introduce a new rack of dirty crockery.
* Carefully wipe the tank with a sponge.
* Close the door and press the cycle start switch to start
a new cycle.
* If your appliance is not equipped with an external
wash meter, every 4 racks introduce the quantity of
detergent corresponding to the 14 liters of consumed
water.
