BONFIGLIOLI Agile AGL 401-05, Быстрый старт

Страница: 12 / 34

4 2 3
X13
1 5 6
10V
out
24V
in
GND
ST
OB
OUT1D MFO1
1 2 3 4 5
X11
6
24V
out
GND ST
OA
IN1D IN2D IN3D
(OUT3D)
2 3
X12
1 4 5 6
IN4D IN5D CAN
H
MFI1 MFI2 CAN
L
V
+
24 VDC
Reference speed
Enable
Actual speed
Digital inputs
Digital inputs
M
°C
Functions of control terminals
24 VDC output X11.1
GND for X11.1
X11.2
Digital input. Input . Contact opened: output
disabled, motor coast to a standstill. Contact closed
(together with X13.3): normal operation.
1 for enable
X11.3
Digital input. Start clockwise.
X11.4
Digital input. Start anticlockwise. X11.5
Digital input/output. Default: input. Data set change-over
together with X12.1.
X11.6
Digital input.
Data set change-over together with X11.6. X12.1
Digital input. Error acknowledgment. X12.2
Multifunction input: digital/analog. Default: analog voltage
input. Reference speed. 50 Hz at 10 VDC, 3.50 Hz at 0 VDC. X12.3
Multifunction input: digital/analog. Default: digital input.
For connection of motor thermal contact. Set P570. X12.4
CAN High
Systembus connection.
Refer to the separate manual.
X12.5
CAN Low X12.6
Default function T
24 VDC input
X13.1
GND for X13.1
X13.2
Digital input. Input 2 for enable. Contact opened: output
disabled, motor coast to a standstill. Contact closed
(together with X11.3): normal operation.
X13.3
10 VDC output X13.4
Digital output. Run signal. Indicates output of frequency
when enable and start command applies. X13.5
Multifunction output. Default: analog. Voltage signal
proportional to actual speed. 10 V at 50 Hz, 0 V at 0 Hz.
X13.6
Standard control wiring
=
=
=
=
=
6 digital inputs, 2 of them for Enable
1 digital input/output
2 multifunction inputs: digital/analog input
1 digital output
1 multifunction output: digital/analog/frequency
,
Comply with the technical data. Refer to section “Technical data of control terminals”.
=
=
1 voltage input 24 VDC
2 voltage outputs, 10 and 24 VDC
= Communication interface CAN
X11.6 X12.1 Selection
0 0 Data set 1
1 0 Data set 2
1 1 Data set 3
0 1 Data set 4
Data set change-over
multifunction input
multifunction output
Parameter
Terminal
Terminal strip
digital input
multifunction input
digital output
MFI2:
P:
T:
X:
IN D:
MFI1:
OUT D:
MFO1:
X10
+24 V
Fault message
Relay output OUT2D
3
2
1
11
X13
X10
X12
X11
0.1 ... 1.5 mm
30 ... 14 AWG
2
=
1 relay output
0-off (default)
1-Warning
2-Error switch-off
P570
Thermal contact evaluation
X12.4
GB