BOMBARDIER ski-doo Tundra Scandic 2004 Series, Руководство по ремонту

Страница: 25 / 427

Section 01 SERVICE TOOLS AND SERVICE PRODUCTS
Subsection 01 (SERVICE TOOLS)
MMR2004_102_01_01A.FM
01-01-5
ENGINE — RECOMMENDED SERVICE TOOLS
The following tools are highly recommended to optimize your basic tool kit and reduce repair time.
Crankshaft bearing
puller with screw (1)
(P/N 420 877 635)
A01B5I4
APPLICATION
All engines.
2,3
1
2,3
4,6
5
7,10,11
8,9,12,13
14
1) Screw M16 x 1.5 x 150 (P/N 420 940 755)
2) Screw M8 x 40 (4) (P/N 420 840 681)
3) Screw M8 x 70 (4) (P/N 420 841 201)
4) Crankshaft protector (P/N 420 976 890)
247 engine.
5) Crankshaft protector PTO (P/N 420 876 552)
All engines except 247.
6) Crankshaft protector MAG (P/N 420 876 557)
All engines except 247.
7) Puller ring (P/N 420 977 490)
Use with half rings
(P/N 420 977 475 or 420 276 025).
8) Half ring (2) (P/N 420 977 475)
For 72 mm O.D. bearings.
9) Half ring (2) (P/N 420 276 025)
For 62 mm O.D. bearings.
10) Puller ring (P/N 420 977 480)
11) Puller ring (P/N 420 977 494)
For half rings (P/N 420 977 479).
12) Half ring (2) (P/N 420 977 479)
For 80 mm O.D. bearings.
13) Half ring (2) (P/N 420 876 330)
For 52 mm O.D. bearings.
14) Distance ring (P/N 529 035 964)
For MAG side bearing.
NEW