56
TYPICAL
1. Engine head
2. Cooling hose
3. Detach bracket holding spark plug cables
4. Remove spark plug cables
11. Connect spark plug cables to the
grounding device of the electrical
box.
TYPICAL
1. Electrical box
2. Connect spark plug cables to grounding
devices
12. Remove both spark plugs and
spray BOMBARDIER LUBE lubri-
cant into each cylinder.
13. Crank the engine a few turns to
distribute the oil on cylinder wall.
14. Apply anti-seize lubricant on spark
plug threads then reinstall them.
15. Reinstall plug on air intake silencer
cover.
16. Properly reconnect spark plug ca-
bles to spark plugs.
17. Wipe up any residual water from
the engine.
NOTE:
Repeat the same procedure
for the other engine (if applicable).
Anticorrosion Treatment
To prevent corrosion, spray a corrosion
inhibitor (salt water resistant) such as
BOMBARDIER LUBE lubricant or equiv-
alent over metallic components in en-
gine compartment.
NOTE:
Engine fogging should be done
with BOMBARDIER LUBE lubricant
whenever the sport boat is to be stored
for few days or a long period.
Apply dielectric grease (salt water re-
sistant) on battery posts and cable con-
nectors.
CAUTION:
Never leave rags or tools
in the engine compartment or in the
bilge.
F04H5YY
2
1
3
4
F04H5ZY
2
1
lmo2002_003a.book Page 56 Wednesday, November 14, 2001 2:39 PM
