BOMBARDIER SEA-DOO GS 5626 1998, Руководство по ремонту, Страница: 379 / 426

Section 13 TECHNICAL DATA
Subsection 01 (SPX MODEL)
13-01-5
TIGHTENING TORQUES SPX (5838/5839)
ENGIN
E
Exhaust manifold screw 40 N•m (30 lbf•ft) (3) (4)
Magneto flywheel nut 105 N•m (77 lbf•ft) (1)
Flywheel (PTO side) 110 N•m (81 lbf•ft) (5)
Crankcase screws
M8 24 N•m (17 lbf•ft) (3) (4)
M10 40 N•m (30 lbf•ft) (3) (4)
Crankcase/engine support nuts 35 N•m (26 lbf•ft) (1)
Engine mount/hull 25 N•m (18 lbf•ft) (1)
Cylinder head screws 24 N•m (17 lbf•ft) (1) (4)
Crankcase/cylinder screws 40 N•m (30 lbf•ft) (3) (4)
Tuned pipe flange screws/nut 40 N•m (30 lbf•ft) (1)
Tuned pipe fixation screws 25 N•m (18 lbf•ft) (1)
Flame arrester screws 10 N•m (89 lbf• in ) (1)
Magneto housing cover screws 9 N•m (80 lbf• in ) (5)
Starter mounting screws 22 N•m (16 lbf•ft) (1)
Spark plugs 24 N•m (17 lbf•ft) (5)
JE
T PUMP
Impeller 70 N•m (52 lbf•ft) (2)
Pump/hull nuts 33 N•m (24 lbf•ft) (1)
Venturi/pump housing screws 21 N•m (16 lbf•ft) (1)
VTS ring screws 13 N•m (10 lbf•ft) (1)
Pump housing cover screws 4 N•m (35 lbf• in ) (1)
Inlet grate screws 8 N•m (71 lbf• in ) (1)
Riding plate screws 10 N•m (89 lbf• in ) (1)
STEE
RING
Cable retaining block bolts 6 N•m (53 lbf• in )
Steering cable/stem arm bolt 3 N•m (26 lbf• in )
Steering stem arm bolts 6 N•m (53 lbf• in )
Handlebar clamp bolts 26 N•m (19 lbf•ft)
Steering cable ball joint bolt (nozzle) 7 N•m (62 lbf• in )
Front support bolts 15 N•m (11 lbf•ft)
Rear support/cable bracket bolts 15 N•m (11 lbf•ft)
Handlebar grip screw 13 N•m (10 lbf•ft)
ADDITIONAL INFORMATION: apply where indicated; (1) Loctite 242 (blue)
(2) Loctite 271 (red)
(3) Loctite 518
(4) Synthetic grease
(5) Anti-seize lubricant
;
WARNING
Correct torques and use of Loctite must be strictly followed.