BOMBARDIER SEA-DOO GS 5626 1998, Руководство по ремонту

Страница: 254 / 426

Section 08 ELECTRICAL SYSTEM
Subsection 05 (INSTRUMENTS AND ACCESSORIES)
08-05-3
Info Center
GSX Limited and GTX Limited
TYPICAL
This is a LCD multifunction gauge. It features the
following functions:
– fuel level
– low fuel level
– low oil level
– low voltage
– overheating
– hourmeter
– clock
– maintenance information
– chronometer
– tachometer
– speedometer
– peak speed
– average speed
– trip meter
– VTS (GSX Limited)
– compass (GTX Limited)
– exterior temperature (GTX Limited)
– lake temperature
The Info Center also features a red warning LED
which blinks whenever one of the following cir-
cumstances occur: low fuel, low oil, low voltage
and overheating.
For example, if the fuel level is low, the LED and
the message “
LOW FUEL” will blink.
As a self test, all LCD segments and the LED will
turn on for 3 seconds each time the watercraft is
started.
SCROLLING FUNCTIONS
Press the MODE button until the desired function
is displayed on the Info Center.
RESET A FUNCTION
To reset a function such as the chronometer, peak
speed, trip meter, etc., select the desired function
using the MODE button then press and hold the
SET button for 2 seconds.
DISPLAY PRIORITIES
The clock (and compass for the GTX Limited) is
the basic mode of the Info Center.
The chronometer, tachometer and speedometer
are the only other functions that may be chosen
to replace the clock mode.
If an another function is chosen, the clock mode
will be displayed again after 4 seconds.
In the event of a warning message such as low
fuel is displayed, the message will blink and over-
ride any other functions.
If more than one warning message is displayed,
the messages will blink and reappear every 4 sec-
onds.
LANGUAGE OPTION
While in the clock mode, press and hold the SET
button for 2 seconds. Language option will be dis-
played.
Press the MODE button to scroll language (En-
glish, French and Spanish).
Press the SET button to confirm the selected lan-
guage and return to the clock mode.
ENGLISH/METRIC OPTION
Press and hold both MODE and SET buttons for
2 seconds. The system will be automatically
changed.
CHRONOMETER
Select the chronometer mode and press the SET
button to start or stop the chronometer.
Press the SET button for 2 seconds to reset the
chronometer.
CLOCK SETTING
While in the clock mode, press and hold both
MODE and SET buttons for 2 seconds. The clock
will blink to confirm the setting mode.
Bombardier
F07H06A