manualshive.com logo in svg

BOMBARDIER Challenger 601-3A CL-600-2B16, Руководство по подготовке пилотов, Страница: 419 / 539

Поделиться
Скачать
BOMBARDIER Challenger 601-3A CL-600-2B16 Скачать руководство пользователя страница 419

AUDIO INTEGRATING SYSTEM

An audio integrating system provides volume,
interphone, and navaid monitoring controls.
The audio integrating system consists of an in-
terphone, loudspeakers, microphone jacks,
and associated radios for transmission and re-
ception. The interphone provides cockpit and
ground crew communications. Ground crew
may use the interphone from the nose wheel
well, avionics bay, and aft equipment bay
(Figure 16-6).

The audio control units permit listening ca-
pabilities for the following:

• VHF navigation (VHF NAV 1 and 2)

• Marker beacon (MKR 1 and 2)

• Automatic direction finder (ADF 1 and

2)

• Distance measuring equipment (DME

1 and 2)

The audio control units provide transmission
and listening capabilities for the following:

• VHF 1 and 2 communications

• HF 1 and 2 communications

The audio control units (Figure 16-7) allow use
from either the headsets or oxygen masks.
The units also provide hot microphone and
loudspeaker functions.

CL 601-3A/R 

16-7

FOR TRAINING PURPOSES ONLY

FlightSafety Canada 

L t é e
L t d .

CL-600-2B16 PILOT TRAINING MANUAL

INTERPHONE UNIT

HDPH MIC

APU
STATION

RADIO RACK
STATION

NOSE WHEEL
WELL STATION

Figure 16-6.   Audio Integrating System Exterior Plug-in Locations

Содержание Challenger 601-3A CL-600-2B16




























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов