25
Problem
Problem
Problem
Problem
Possible cause
Possible cause
Possible cause
Possible cause
Solution
Solution
Solution
Solution
The device is not
working properly
or at all.
-
Do food items prevent the device lid
from closing properly?
-
Are the ventilation openings clear of
obstruction?
-
Arrange the food properly.
-
Unblock the ventilation openings, install
the device freely.
Device cools too
much.
Is the temperature control set properly? Check the temperature setting.
The food is too
warm.
-
Is the temperature control set proper-
ly?
-
Was the device lid open for an ex-
tended period?
-
Was large quantity of food placed in
the device within the last 24 hours?
-
Is the device near a heat source?
-
Check the temperature setting.
-
Open the lid only as long as necessary.
-
Turn the control panel to a colder setting
temporally.
-
Check the installation location (see “In-
stallation”).
Loud noise during
operation.
Does the device not stand vertical or
horizontal?
Adjust the feet accordingly. Liquid flow
sounds in the cooling circuit are normal.
Water on the bot-
tom.
-
Is the temperature control set proper-
ly?
-
Is the water discharge channel or
opening blocked?
-
Check the temperature setting.
-
Clean the water discharge channel or
opening.
The housing sides
are very warm.
The refrigeration cycle takes place in the foaming. The heat exchangers are installed
in the housing covered. The device cut the interior heat, which must be dissipated
through the housing areas.
Water on the outer
surface.
On days of high humidity, condensation might occur on the outer surface of the de-
vice. This is no malfunction; you may simply wipe the water off.
NOTE:
NOTE:
NOTE:
NOTE:
If a problem still persists after following the steps above, please contact your trader or an authorized
technician.
