23
Defrosting
Defrosting
Defrosting
Defrosting
To achieve better cooling and to save energy, defrost the device regularly. To start the defrosting pro-
cess turn the temperature control to the AUS
AUS
AUS
AUS-position and disconnect the plug or turn off the fuse.
Remove the food items and keep covered at a cool location.
Open the water discharge channel at the device bottom and the water discharge opening at the device
front. Place a drip tray under in order to catch leaking water. When the ice has melted, wipe the con-
densate away and dry the device interior. You may then restart the device by connecting the plug and
turning the temperature control.
CAUTION
CAUTION
CAUTION
CAUTION::::
Never use metal objects (e.g. knives) for removing ice from the vaporizer. The vaporizer could be
damaged. A defect vaporizer could cause serious damages.
NOTE:
NOTE:
NOTE:
NOTE:
In order to speed up the defrosting process, make use of the included ice scraper.
Operating noise
Operating noise
Operating noise
Operating noise
Type of sound
Type of sound
Type of sound
Type of sound
Cause / solution
Cause / solution
Cause / solution
Cause / solution
Normal
Normal
Normal
Normal
noise
noise
noise
noise
Mumbling
Caused by the compressor during its operation.
This is stronger when it turns on or off.
Liquid sounds
Caused by the circulation of the refrigerant in the device.
Click sounds
The temperature control turns the compressor on or off.
Disturbing noises
Vibration of the shelves or cooling coils – check if those are
securely fastened.
Turning off
Turning off
Turning off
Turning off
Turn the temperature
Turn the temperature
Turn the temperature
Turn the temperature control
control
control
control to
to
to
to the
the
the
the AUS
AUS
AUS
AUS----setting
setting
setting
setting in order to turn off the device.
in order to turn off the device.
in order to turn off the device.
in order to turn off the device.
If the device will not be operated for a longer period of time:
•
Remove the entire food from the device.
•
Turn the temperature control to the AUS
AUS
AUS
AUS-setting.
•
Disconnect the plug or turn off / unscrew the fuse.
•
Thoroughly clean the device (see ”Cleaning”).
•
Keep the device lid open in order to prevent bad odors.
Tips
Tips
Tips
Tips for E
for E
for E
for Energy sav
nergy sav
nergy sav
nergy saving
ing
ing
ing
•
Disconnect the plug if you do not use the device.
•
Do not install the device near stoves, heaters or other heat sources. In case of higher ambient
temperatures, the compressor will run more frequently and longer.
•
Ensure sufficient ventilation at the bottom and rear device side. Never block ventilation openings.
•
Allow warm dishes to cool down before putting them in the device.
•
Do not open the lid longer than necessary.
•
Make sure that the temperature in the freezer does not rise above -18°C.
