19
faulty cable be replaced only by the manufacturer, by our customer
service or by qualified person and with a cable of the same type.
•
Use the provided collection points of electrical equipment for the dis-
posal of the appliance.
Coolant
Coolant
Coolant
Coolant
WAR
WAR
WAR
WARNING
NING
NING
NING::::
The coolant circuit of this device contains the refrigerant Isobutane (R600a), a natural gas that is
flammable and of high environmental compatibility. Make sure no parts of the coolant circuit get dam-
aged during transport and installation of the device.
If the coolant circuit is damaged:
If the coolant circuit is damaged:
If the coolant circuit is damaged:
If the coolant circuit is damaged:
•
It is imperative to avoid any open flames or ignition source.
•
Thoroughly air the room in which the device is installed.
Unpacking the A
Unpacking the A
Unpacking the A
Unpacking the Appliance
ppliance
ppliance
ppliance
1.
Remove the appliance from its packaging.
2.
The device and parts of the interior are protected for transport. Remove all adhesive tapes from the
unit lid. You may remove adhesive residue with a cleaning solvent. Also remove any adhesive
tapes and packaging materials from the inside of the device.
3.
To prevent hazards, check the appliance for any transport damage.
4.
In case of damage, do not put the device into operation. Contact your trader.
NOTE
NOTE
NOTE
NOTE::::
Production residue or dust may have collected on the appliance. We recommend cleaning the appli-
ance according to chapter “Cleaning”.
Overview of the Appliance
Overview of the Appliance
Overview of the Appliance
Overview of the Appliance
NOTE
NOTE
NOTE
NOTE::::
The drawing can deviate from the original device.
1 Integrated lid handle
2 Freezing basket
3 Temperature control
4 Adjustable feet at the front, castors at the rear
5 Water discharge opening
6 Power cord
